|
|
Y. Driouich, M. Parente, and E. Tronci. "Modeling cyber-physical systems for automatic verification." In 14th International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design (SMACD 2017), 1–4., 2017. DOI: 10.1109/SMACD.2017.7981621.
Keywords: cyber-physical systems;formal verification;maximum power point trackers;power engineering computing;Modelica;automatic verification;complex power electronics systems;cyber-physical systems modeling;distributed maximum power point tracking system;open standard modeling language;Computational modeling;Control systems;Integrated circuit modeling;Mathematical model;Maximum power point trackers;Object oriented modeling;Radiation effects;Automatic Formal Verification;Cyber-Physical Systems;DMPPT;Modeling;Photovoltaic systems;Simulation;System Analysis and Design
|
|
|
|
Y. Driouich, M. Parente, and E. Tronci. "A methodology for a complete simulation of Cyber-Physical Energy Systems." In EESMS 2018 – Environmental, Energy, and Structural Monitoring Systems, Proceedings, 1–5., 2018. DOI: 10.1109/EESMS.2018.8405826.
|
|
|
|
T. Mancini, F. Mari, I. Melatti, I. Salvo, E. Tronci, J. Gruber, B. Hayes, M. Prodanovic, and L. Elmegaard. "Parallel Statistical Model Checking for Safety Verification in Smart Grids." In 2018 IEEE International Conference on Communications, Control, and Computing Technologies for Smart Grids (SmartGridComm), 1–6., 2018. DOI: 10.1109/SmartGridComm.2018.8587416.
|
|
|
|
Y. Driouich, M. Parente, and E. Tronci. "Model Checking Cyber-Physical Energy Systems." In Proceedings of 2017 International Renewable and Sustainable Energy Conference, IRSEC 2017. Institute of Electrical and Electronics Engineers Inc., 2018. DOI: 10.1109/IRSEC.2017.8477334.
|
|
|
|
T. Mancini, E. Tronci, A. Scialanca, F. Lanciotti, A. Finzi, R. Guarneri, and S. Di Pompeo. "Optimal Fault-Tolerant Placement of Relay Nodes in a Mission Critical Wireless Network." In 25th RCRA International Workshop on “Experimental Evaluation of Algorithms for Solving Problems with Combinatorial Explosion” (RCRA 2018)., 2018. DOI: 10.29007/grw9.
|
|
|
|
T. Mancini, F. Mari, A. Massini, I. Melatti, I. Salvo, S. Sinisi, E. Tronci, R. Ehrig, S. Röblitz, and B. Leeners. "Computing Personalised Treatments through In Silico Clinical Trials. A Case Study on Downregulation in Assisted Reproduction." In 25th RCRA International Workshop on “Experimental Evaluation of Algorithms for Solving Problems with Combinatorial Explosion” (RCRA 2018)., 2018. DOI: 10.29007/g864.
|
|
|
|
A. Pappagallo, A. Massini, and E. Tronci. "Monte Carlo Based Statistical Model Checking of Cyber-Physical Systems: A Review." Information 11, no. 558 (2020). DOI: 10.3390/info11120588.
|
|
|
|
S. Sinisi, V. Alimguzhin, T. Mancini, and E. Tronci. "Reconciling interoperability with efficient Verification and Validation within open source simulation environments." Simulation Modelling Practice and Theory (2021): 102277. ISSN: 1569-190x. DOI: 10.1016/j.simpat.2021.102277.
Abstract: A Cyber-Physical System (CPS) comprises physical as well as software subsystems. Simulation-based approaches are typically used to support design and Verification and Validation (V&V) of CPSs in several domains such as: aerospace, defence, automotive, smart grid and healthcare. Accordingly, many simulation-based tools are available to support CPS design. This, on one side, enables designers to choose the toolchain that best suits their needs, on the other side poses huge interoperability challenges when one needs to simulate CPSs whose subsystems have been designed and modelled using different toolchains. To overcome such an interoperability problem, in 2010 the Functional Mock-up Interface (FMI) has been proposed as an open standard to support both Model Exchange (ME) and Co-Simulation (CS) of simulation models created with different toolchains. FMI has been adopted by several modelling and simulation environments. Models adhering to such a standard are called Functional Mock-up Units (FMUs). Indeed FMUs play an essential role in defining complex CPSs through, e.g., the System Structure and Parametrization (SSP) standard. Simulation-based V&V of CPSs typically requires exploring different simulation scenarios (i.e., exogenous input sequences to the CPS under design). Many such scenarios have a shared prefix. Accordingly, to avoid simulating many times such shared prefixes, the simulator state at the end of a shared prefix is saved and then restored and used as a start state for the simulation of the next scenario. In this context, an important FMI feature is the capability to save and restore the internal FMU state on demand. This is crucial to increase efficiency of simulation-based V&V. Unfortunately, the implementation of this feature is not mandatory and it is available only within some commercial software. As a result, the interoperability enabled by the FMI standard cannot be fully exploited for V&V when using open-source simulation environments. This motivates developing such a feature for open-source CPS simulation environments. Accordingly, in this paper, we focus on JModelica, an open-source modelling and simulation environment for CPSs based on an open standard modelling language, namely Modelica. We describe how we have endowed JModelica with our open-source implementation of the FMI 2.0 functions needed to save and restore internal states of FMUs for ME. Furthermore, we present experimental results evaluating, through 934 benchmark models, correctness and efficiency of our extended JModelica. Our experimental results show that simulation-based V&V is, on average, 22 times faster with our get/set functionality than without it.
Keywords: Simulation, Verification and Validation, Interoperability, FMI/FMU, Model Exchange, Cyber-Physical Systems
|
|
|
|
Giuseppe Della Penna, Daniele Magazzeni, Alberto Tofani, Benedetto Intrigila, Igor Melatti, and Enrico Tronci. "Automatic Synthesis of Robust Numerical Controllers." In Icas '07, 4. IEEE Computer Society, 2007. ISSN: 0-7695-2859-5. DOI: 10.1109/CONIELECOMP.2007.59.
Abstract: A major problem of numerical controllers is their robustness, i.e. the state read from the plant may not be in the controller table, although it may be close to some states in the table. For continuous systems, this problem is typically handled by interpolation techniques. Unfortunately, when the plant contains both continuous and discrete variables, the interpolation approach does not work well. To cope with this kind of systems, we propose a general methodology that exploits explicit model checking in an innovative way to automatically synthesize a (time-) optimal numerical controller from a plant specification and apply an optimized strengthening algorithm only on the most significant states, in order to reach an acceptable robustness degree. We implemented all the algorithms within our CGMurphi tool, an extension of the well-known CMurphi verifier, and tested the effectiveness of our approach by applying it to the well-known truck and trailer obstacles avoidance problem.
|
|
|
|
G. Dipoppa, G. D'Alessandro, R. Semprini, and E. Tronci. "Integrating Automatic Verification of Safety Requirements in Railway Interlocking System Design." In High Assurance Systems Engineering, 2001. Sixth IEEE International Symposium on, 209–219. Albuquerque, NM, USA: IEEE Computer Society, 2001. ISSN: 0-7695-1275-5. DOI: 10.1109/HASE.2001.966821.
Abstract: A railway interlocking system (RIS) is an embedded system (namely a supervisory control system) that ensures the safe, operation of the devices in a railway station. RIS is a safety critical system. We explore the possibility of integrating automatic formal verification methods in a given industry RIS design flow. The main obstructions to be overcome in our work are: selecting a formal verification tool that is efficient enough to solve the verification problems at hand; and devising a cost effective integration strategy for such tool. We were able to devise a successful integration strategy meeting the above constraints without requiring major modification in the pre-existent design flow nor retraining of personnel. We run verification experiments for a RIS designed for the Singapore Subway. The experiments show that the RIS design flow obtained from our integration strategy is able to automatically verify real life RIS designs.
|
|
