Giuseppe Della Penna, Daniele Magazzeni, Alberto Tofani, Benedetto Intrigila, Igor Melatti, and Enrico Tronci. "Automatic Synthesis of Robust Numerical Controllers." In Icas '07, 4. IEEE Computer Society, 2007. ISSN: 0-7695-2859-5. DOI: 10.1109/CONIELECOMP.2007.59.
Abstract: A major problem of numerical controllers is their robustness, i.e. the state read from the plant may not be in the controller table, although it may be close to some states in the table. For continuous systems, this problem is typically handled by interpolation techniques. Unfortunately, when the plant contains both continuous and discrete variables, the interpolation approach does not work well. To cope with this kind of systems, we propose a general methodology that exploits explicit model checking in an innovative way to automatically synthesize a (time-) optimal numerical controller from a plant specification and apply an optimized strengthening algorithm only on the most significant states, in order to reach an acceptable robustness degree. We implemented all the algorithms within our CGMurphi tool, an extension of the well-known CMurphi verifier, and tested the effectiveness of our approach by applying it to the well-known truck and trailer obstacles avoidance problem.
|
Vadim Alimguzhin, Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. "Automatic Control Software Synthesis for Quantized Discrete Time Hybrid Systems." In Proceedings of the 51th IEEE Conference on Decision and Control, CDC 2012, December 10-13, 2012, Maui, HI, USA, 6120–6125. IEEE, 2012. Notes: Techreport version can be found at http://arxiv.org/abs/1207.4098. DOI: 10.1109/CDC.2012.6426260.
|
Vadim Alimguzhin, Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. "On Model Based Synthesis of Embedded Control Software." In Proceedings of the 12th International Conference on Embedded Software, EMSOFT 2012, part of the Eighth Embedded Systems Week, ESWeek 2012, Tampere, Finland, October 7-12, 2012, edited by Ahmed Jerraya and Luca P. Carloni and Florence Maraninchi and John Regehr, 227–236. ACM, 2012. Notes: Techreport version can be found at arxiv.org. DOI: 10.1145/2380356.2380398.
|
Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. "Linear Constraints as a Modeling Language for Discrete Time Hybrid Systems." In Proceedings of ICSEA 2012, The Seventh International Conference on Software Engineering Advances, 664–671. ThinkMind, 2012.
|
Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. "Undecidability of Quantized State Feedback Control for Discrete Time Linear Hybrid Systems." In Theoretical Aspects of Computing – ICTAC 2012, edited by A. Roychoudhury and M. D'Souza, 243–258. Lecture Notes in Computer Science 7521. Springer Berlin Heidelberg, 2012. DOI: 10.1007/978-3-642-32943-2_19.
|
Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. "Control Software Visualization." In Proceedings of INFOCOMP 2012, The Second International Conference on Advanced Communications and Computation, 15–20. ThinkMind, 2012. ISSN: 978-1-61208-226-4.
|
Vadim Alimguzhin, Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. A Map-Reduce Parallel Approach to Automatic Synthesis of Control Software. Vol. abs/1210.2276. CoRR, Technical Report, 2012.
Abstract: Many Control Systems are indeed Software Based Control Systems, i.e. control systems whose controller consists of control software running on a microcontroller device. This motivates investigation on Formal Model Based Design approaches for automatic synthesis of control software.
Available algorithms and tools (e.g., QKS) may require weeks or even months of computation to synthesize control software for large-size systems. This motivates search for parallel algorithms for control software synthesis.
In this paper, we present a map-reduce style parallel algorithm for control software synthesis when the controlled system (plant) is modeled as discrete time linear hybrid system. Furthermore we present an MPI-based implementation PQKS of our algorithm. To the best of our knowledge, this is the first parallel approach for control software synthesis.
We experimentally show effectiveness of PQKS on two classical control synthesis problems: the inverted pendulum and the multi-input buck DC/DC converter. Experiments show that PQKS efficiency is above 65%. As an example, PQKS requires about 16 hours to complete the synthesis of control software for the pendulum on a cluster with 60 processors, instead of the 25 days needed by the sequential algorithm in QKS.
|
Vadim Alimguzhin, Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. On Model Based Synthesis of Embedded Control Software. Vol. abs/1207.4474. CoRR, Technical Report, 2012.
Abstract: Many Embedded Systems are indeed Software Based Control Systems (SBCSs), that is control systems whose controller consists of control software running on a microcontroller device. This motivates investigation on Formal Model Based Design approaches for control software. Given the formal model of a plant as a Discrete Time Linear Hybrid System and the implementation specifications (that is, number of bits in the Analog-to-Digital (AD) conversion) correct-by-construction control software can be automatically generated from System Level Formal Specifications of the closed loop system (that is, safety and liveness requirements), by computing a suitable finite abstraction of the plant.
With respect to given implementation specifications, the automatically generated code implements a time optimal control strategy (in terms of set-up time), has a Worst Case Execution Time linear in the number of AD bits $b$, but unfortunately, its size grows exponentially with respect to $b$. In many embedded systems, there are severe restrictions on the computational resources (such as memory or computational power) available to microcontroller devices.
This paper addresses model based synthesis of control software by trading system level non-functional requirements (such us optimal set-up time, ripple) with software non-functional requirements (its footprint). Our experimental results show the effectiveness of our approach: for the inverted pendulum benchmark, by using a quantization schema with 12 bits, the size of the small controller is less than 6% of the size of the time optimal one.
|
Vadim Alimguzhin, Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. Automatic Control Software Synthesis for Quantized Discrete Time Hybrid Systems. Vol. abs/1207.4098. CoRR, Technical Report, 2012.
Abstract: Many Embedded Systems are indeed Software Based Control Systems, that is control systems whose controller consists of control software running on a microcontroller device. This motivates investigation on Formal Model Based Design approaches for automatic synthesis of embedded systems control software. This paper addresses control software synthesis for discrete time nonlinear systems. We present a methodology to overapproximate the dynamics of a discrete time nonlinear hybrid system H by means of a discrete time linear hybrid system L(H), in such a way that controllers for L(H) are guaranteed to be controllers for H. We present experimental results on the inverted pendulum, a challenging and meaningful benchmark in nonlinear Hybrid Systems control.
|
Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. Model Based Synthesis of Control Software from System Level Formal Specifications. Vol. abs/1107.5638. CoRR, Technical Report, 2013.
Abstract: Many Embedded Systems are indeed Software Based Control Systems, that is control systems whose controller consists of control software running on a microcontroller device. This motivates investigation on Formal Model Based Design approaches for automatic synthesis of embedded systems control software.
We present an algorithm, along with a tool QKS implementing it, that from a formal model (as a Discrete Time Linear Hybrid System) of the controlled system (plant), implementation specifications (that is, number of bits in the Analog-to-Digital, AD, conversion) and System Level Formal Specifications (that is, safety and liveness requirements for the closed loop system) returns correct-by-construction control software that has a Worst Case Execution Time (WCET) linear in the number of AD bits and meets the given specifications.
We show feasibility of our approach by presenting experimental results on using it to synthesize control software for a buck DC-DC converter, a widely used mixed-mode analog circuit, and for the inverted pendulum.
|