
Francesco Brizzolari, Igor Melatti, Enrico Tronci, and Giuseppe Della Penna. "Disk Based Software Verification via Bounded Model Checking." In APSEC '07: Proceedings of the 14th AsiaPacific Software Engineering Conference, 358–365. Washington, DC, USA: IEEE Computer Society, 2007. ISSN: 0769530575. DOI: 10.1109/APSEC.2007.43.
Abstract: One of the most successful approach to automatic software verification is SAT based bounded model checking (BMC). One of the main factors limiting the size of programs that can be automatically verified via BMC is the huge number of clauses that the backend SAT solver has to process. In fact, because of this, the SAT solver may easily run out of RAM. We present two disk based algorithms that can considerably decrease the number of clauses that a BMC backend SAT solver has to process in RAM. Our experimental results show that using our disk based algorithms we can automatically verify programs that are out of reach for RAM based BMC.



Giuseppe Della Penna, Daniele Magazzeni, Alberto Tofani, Benedetto Intrigila, Igor Melatti, and Enrico Tronci. "Automatic Synthesis of Robust Numerical Controllers." In Icas '07, 4. IEEE Computer Society, 2007. ISSN: 0769528595. DOI: 10.1109/CONIELECOMP.2007.59.
Abstract: A major problem of numerical controllers is their robustness, i.e. the state read from the plant may not be in the controller table, although it may be close to some states in the table. For continuous systems, this problem is typically handled by interpolation techniques. Unfortunately, when the plant contains both continuous and discrete variables, the interpolation approach does not work well. To cope with this kind of systems, we propose a general methodology that exploits explicit model checking in an innovative way to automatically synthesize a (time) optimal numerical controller from a plant specification and apply an optimized strengthening algorithm only on the most significant states, in order to reach an acceptable robustness degree. We implemented all the algorithms within our CGMurphi tool, an extension of the wellknown CMurphi verifier, and tested the effectiveness of our approach by applying it to the wellknown truck and trailer obstacles avoidance problem.



Toni Mancini, Federico Mari, Annalisa Massini, Igor Melatti, and Enrico Tronci. "System Level Formal Verification via Distributed MultiCore Hardware in the Loop Simulation." In Proc. of the 22nd Euromicro International Conference on Parallel, Distributed and NetworkBased Processing. IEEE Computer Society, 2014. DOI: 10.1109/PDP.2014.32.



Vadim Alimguzhin, Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. "Automatic Control Software Synthesis for Quantized Discrete Time Hybrid Systems." In Proceedings of the 51th IEEE Conference on Decision and Control, CDC 2012, December 1013, 2012, Maui, HI, USA, 6120–6125. IEEE, 2012. ISBN: 9781467320658. Notes: Techreport version can be found at http://arxiv.org/abs/1207.4098. DOI: 10.1109/CDC.2012.6426260.



Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. "Synthesizing Control Software from Boolean Relations." International Journal on Advances in Software vol. 5, nr 3&4 (2012): 212–223. IARIA. ISSN: 19422628.
Abstract: Many software as well digital hardware automatic
synthesis methods define the set of
implementations meeting the given system
specifications with a boolean relation K. In
such a context a fundamental step in the software
(hardware) synthesis process is finding effective
solutions to the functional equation defined by
K. This entails finding a (set of) boolean
function(s) F (typically represented using
OBDDs, Ordered Binary Decision Diagrams)
such that: 1) for all x for which K is
satisfiable, K(x, F(x)) = 1 holds; 2) the
implementation of F is efficient with respect
to given implementation parameters such as code
size or execution time. While this problem has
been widely studied in digital hardware synthesis,
little has been done in a software synthesis
context. Unfortunately, the approaches developed
for hardware synthesis cannot be directly used in
a software context. This motivates investigation
of effective methods to solve the above problem
when F has to be implemented with software. In
this paper, we present an algorithm that, from an
OBDD representation for K, generates a C code
implementation for F that has the same size as
the OBDD for F and a worst case execution time
linear in nr, being n = x the number of
input arguments for functions in F and r the
number of functions in F. Moreover, a formal
proof of the proposed algorithm correctness is
also shown. Finally, we present experimental
results showing effectiveness of the proposed
algorithm.
Keywords: Control Software Synthesis; Embedded Systems; Model Checking



Federico Mari, Igor Melatti, Ivano Salvo, and Enrico Tronci. "Linear Constraints and Guarded Predicates as a Modeling Language for Discrete Time Hybrid Systems." International Journal on Advances in Software vol. 6, nr 1&2 (2013): 155–169. IARIA. ISSN: 19422628.
Abstract: Model based design is particularly appealing in
software based control systems (e.g., embedded
software) design, since in such a case system
level specifications are much easier to define
than the control software behavior itself. In
turn, model based design of embedded systems
requires modeling both continuous subsystems
(typically, the plant) as well as discrete
subsystems (the controller). This is typically
done using hybrid systems. Mixed Integer Linear
Programming (MILP) based abstraction techniques
have been successfully applied to automatically
synthesize correctbyconstruction control
software for discrete time linear hybrid systems,
where plant dynamics is modeled as a linear
predicate over state, input, and next state
variables. Unfortunately, MILP solvers require
such linear predicates to be conjunctions of
linear constraints, which is not a natural way of
modeling hybrid systems. In this paper we show
that, under the hypothesis that each variable
ranges over a bounded interval, any linear
predicate built upon conjunction and disjunction
of linear constraints can be automatically
translated into an equivalent conjunctive
predicate. Since variable bounds play a key role
in this translation, our algorithm includes a
procedure to compute all implicit variable bounds
of the given linear predicate. Furthermore, we
show that a particular form of linear predicates,
namely guarded predicates, are a natural and
powerful language to succinctly model discrete
time linear hybrid systems dynamics. Finally, we
experimentally show the feasibility of our
approach on an important and challenging case
study taken from the literature, namely the
multiinput Buck DCDC Converter. As an example,
the guarded predicate that models (with 57
constraints) a 6inputs Buck DCDC Converter is
translated in a conjunctive predicate (with 102
linear constraints) in about 40 minutes.
Keywords: Modelbased software design; Linear predicates; Hybrid systems



Giuseppe Della Penna, Antinisca Di Marco, Benedetto Intrigila, Igor Melatti, and Alfonso Pierantonio. "Interoperability mapping from XML schemas to ER diagrams." Data Knowl. Eng. 59, no. 1 (2006): 166–188. Elsevier Science Publishers B. V.. ISSN: 0169023x. DOI: 10.1016/j.datak.2005.08.002.
Abstract: The eXtensible Markup Language (XML) is a de facto standard on the Internet and is now being used to exchange a variety of data structures. This leads to the problem of efficiently storing, querying and retrieving a great amount of data contained in XML documents. Unfortunately, XML data often need to coexist with historical data. At present, the best solution for storing XML into preexisting data structures is to extract the information from the XML documents and adapt it to the data structuresÃ¢â‚¬â„¢ logical model (e.g., the relational model of a DBMS). In this paper, we introduce a technique called Xere (XML entityÃ‚â€“relationship exchange) to assist the integration of XML data with other data sources. To this aim, we present an algorithm that maps XML schemas into entityÃ‚â€“relationship diagrams, discuss its soundness and completeness and show its implementation in XSLT.



Benedetto Intrigila, Igor Melatti, Alberto Tofani, and Guido Macchiarelli. "Computational models of myocardial endomysial collagen arrangement." Computer Methods and Programs in Biomedicine 86, no. 3 (2007): 232–244. Elsevier NorthHolland, Inc.. ISSN: 01692607. DOI: 10.1016/j.cmpb.2007.03.004.
Abstract: Collagen extracellular matrix is one of the factors related to high passive stiffness of cardiac muscle. However, the architecture and the mechanical aspects of the cardiac collagen matrix are not completely known. In particular, endomysial collagen contribution to the passive mechanics of cardiac muscle as well as its micro anatomical arrangement is still a matter of debate. In order to investigate mechanical and structural properties of endomysial collagen, we consider two alternative computational models of some specific aspects of the cardiac muscle. These two models represent two different views of endomysial collagen distribution: (1) the traditional view and (2) a new view suggested by the data obtained from scanning electron microscopy (SEM) in NaOH macerated samples (a method for isolating collagen from the other tissue). We model the myocardial tissue as a net of spring elements representing the cardiomyocytes together with the endomysial collagen distribution. Each element is a viscous elastic spring, characterized by an elastic and a viscous constant. We connect these springs to imitate the interconnections between collagen fibers. Then we apply to the net of springs some external forces of suitable magnitude and direction, obtaining an extension of the net itself. In our setting, the ratio forces magnitude /net extension is intended to model the stress /strain ratio of a microscopical portion of the myocardial tissue. To solve the problem of the correct identification of the values of the different parameters involved, we use an artificial neural network approach. In particular, we use this technique to learn, given a distribution of external forces, the elastic constants of the springs needed to obtain a desired extension as an equilibrium position. Our experimental findings show that, in the model of collagen distribution structured according to the new view, a given stress /strain ratio (of the net of springs, in the sense specified above) is obtained with much smaller (w.r.t. the other model, corresponding to the traditional view) elasticity constants of the springs. This seems to indicate that by an appropriate structure, a given stiffness of the myocardial tissue can be obtained with endomysial collagen fibers of much smaller size.



Giuseppe Della Penna, Benedetto Intrigila, Daniele Magazzeni, Igor Melatti, and Enrico Tronci. "CGMurphi: Automatic synthesis of numerical controllers for nonlinear hybrid systems." European Journal of Control 19, no. 1 (2013): 14–36. Elsevier NorthHolland, Inc.. ISSN: 09473580. DOI: 10.1016/j.ejcon.2013.02.001.



Marco Gribaudo, Andras HorvÃ¡th, Andrea Bobbio, Enrico Tronci, Ester Ciancamerla, and Michele Minichino. "Fluid Petri Nets and hybrid model checking: a comparative case study." Int. Journal on: Reliability Engineering & System Safety 81, no. 3 (2003): 239–257. Elsevier. DOI: 10.1016/S09518320(03)000899.
Abstract: The modeling and analysis of hybrid systems is a recent and challenging research area which is actually dominated by two main lines: a functional analysis based on the description of the system in terms of discrete state (hybrid) automata (whose goal is to ascertain conformity and reachability properties), and a stochastic analysis (whose aim is to provide performance and dependability measures). This paper investigates a unifying view between formal methods and stochastic methods by proposing an analysis methodology of hybrid systems based on Fluid Petri Nets (FPNs). FPNs can be analyzed directly using appropriate tools. Our paper shows that the same FPN model can be fed to different functional analyzers for model checking. In order to extensively explore the capability of the technique, we have converted the original FPN into languages for discrete as well as hybrid as well as stochastic model checkers. In this way, a first comparison among the modeling power of well known tools can be carried out. Our approach is illustrated by means of a Ã¢â‚¬â„¢real worldÃ¢â‚¬â„¢ hybrid system: the temperature control system of a cogenerative plant.

